When purchasing a new home it is important to get more than just a home inspection. Most home inspectors will fail to notice when important systems need repair, maintenance, or replacement. This could leave the new homeowner responsible for a pile of unexpected expenses right after purchasing a new home. That is why you need an air conditioning system inspection. That way you can get air conditioning repair in Saratoga, CA completed before moving into your new home. Here are a few things included in an air conditioning system inspection:
1. Evaporator Coil
The HVAC technician will start with the evaporator coil located indoors. If it looks frozen, dirty, or moldy then you could be in trouble. A dirty coil could result in significant airflow problems. And this will only result in more wear and tear on the system if it goes untreated for too long.
2. Drain Pan
During the inspection, the technician will also check the condition of the drain pan. This is a common source of leaks and mold growth. And the last thing you need in your new home is water leaking all over the place.
3. Condensation Line
Another important step for reducing the risk of leaks is an inspection of the condensation line. The technician will make sure the line is not clogged. They will also make sure there are no loose connections, cracks, or holes in the line. This will also include an inspection of the condensate drain and condensate trap to make sure there are no clogs or leaks.
4. Outdoor Condenser and Blower Fan
The technician will take the inspection outside as well. They will check the outside unit, first making sure it is clear of debris. They will then make sure the condition and efficiency of the condenser fan and motor are up to snuff.
5. Refrigerant Levels
A professional technician will also check the refrigerant levels of the air conditioning system. Refrigerant does not get used up. It only cycles through the system. And low refrigerant is the result of a leak. In some cases, the technician can refill the refrigerant, but it is important to note that Freon R-22 is now banned, which could impact older air conditioning systems.
6. Electrical Components
To reduce the risk of problems, the technician will also inspect and test all electrical wiring and connections in the air conditioning system. They can assess the efficiency of the system by measuring the amp and voltage draws of the different components and make sure they are operating in a safe range.
7. Airflow
The HVAC professional will then assess the system for proper airflow. Without proper airflow, you would end up paying more for your utility bills without getting the comfort you deserve. They accomplish this by testing the air temperature throughout the duct system. They also test the static pressure and inspect the external condition of the duct system. They will also check all registers, grilles, and vents to make sure they are open.
Do you need an air conditioning system inspection or air conditioning repair in Saratoga, CA? Do not wait to call the experts at Pelle Heating & Air Conditioning.
The post Air Conditioning System Inspection appeared first on Pelle Heating & Air Conditioning.